MACHINE SHOP EQUIPMENT & TOOLING
Auction
MARTIN CUTTING TOOLS INC.
Tuesday, March 22, 2011 @ 10 AM
3661 - 93 Street,
Edmonton, Alberta
Industrial Machine Shop Equip. & Cutting Tool
AUCTION
MARTIN CUTTING TOOLS INC.
TUESDAY, MARCH 22, 2011 @ 10 AM
Sale Site - 3661-93 Street
EDMONTON, ALBERTA
SELLING APPROX. 100 Pc MAJOR NEW & PREOWED INDUSTRIAL MACHINE SHOP EQUIPMENT
Selling On-Line @ 12 Noon with
LATHES
NEW CRAFTEX 13” X 24” ENGINE LATHE
Model CT-089, Serial 609982
110V / 1 / 60 / 1Hp
Steady & Follower Rest, 6” 3-Jaw Chuck
-Lot Lathe Tooling
NEW SLIVEN 25” X 120” GAP BED ENGINE LATHE
Model CU630, Serial 29359
220/440V / 3 / 60 / 10 Hp
Spindle Bore 4-1/8”, Speeds 1250 Rpm, Steady
40 Pos. Drop in Tool post, Taper Attachment, Coolant
Work Light, 4 Way Feeds & Rapids
NEW 16” X 65” GAP BED ENGINE LATHE
Model C404 T, Serial 2630
220/440v / 3 / 60 / 7.5 Hp
Spindle 2-3/16”, Speeds 2000 Rpm
Swing Over Bed 17”, In Gap 24.5”, Over Cross 11”
40 Position ‘B’ Drop in Toolpost W/ Toolholder
2 Axis Feeds & Rapids, Taper Turning Attachment
Imperial Graduations and Dials, Threading, Coolant
Chip Tray, Splash Guards, Manual, 8” Diam. 3 Jaw Chuck
Work Light
HARDINGE PRECISION LATHE
Model HCT Chucker, Serial l 28564
220V / 3 / 60 / 1 Hp
3000 Rpm, 5‘C’ Colet, 8 Pos. Turret, Coolant
STANKO 1M63 27.5” X 120” ENGINE LATHE
Model 1M63H-3, Serial 4494
440V / 3 / 60 / 20 Hp
Spindle Bore 3-1/8”, Speeds 1250 Rpm, 4 Way Tool post
20” Dia. 4 Jaw Chuck, Steady, Taper Attachment
6 Way Feeds & Rapids, Coolant
K&N RUSSIAN 18” X 58” ENGINE LATHE
Model 16K20, Serial 6513921
220V / 3 / 60 / 7.5 Hp
Spindle Bore 1-3/4”, Speeds 2000 Rpm, 4 Way Tool post
Taper Attachment, 3 Jaw Chuck, Coolant, 4 Way Feeds & Rapids
TUR 18” X 80” GAP BED ENGINE LATHE
Model TUG-40, Serial 8301, Yr. 1994
575V / 3 / 60 / 7.5 Hp
Spindle Bore 2-1/8”, Speeds 1600 Rpm
Drop in Tool post, Steady, Taper Attachment
8” Dia. 3 Jaw Chuck, 2 Axis Accurite DRO
IKEGAI HD 20” X 60” ENGINE LATHE
Model A-20, Serial 14950T
220/440V / 3 / 60 / 10 Hp
Spindle Bore 1-3/4”, Speeds 2000 Rpm
Drop in Tool post, Steady W/ Multiple Holders
Coolant, Change Gears, 12” Dia. 3 Jaw Chuck
DEAN SMITH & GRACE 20” X 72” ENGINE LATHE
Model Type 18, Serial 29865
440V / 3 / 60 / 12.5 Hp
Spindle Bore 3-5/8”, Speeds 1000 Rpm
4 Way Tool post, Steady, Feeds, Rapid, Threading, Coolant
STANKO 18” X 60” GAP BED ENGINE LATHE
Model 16K20G, Serial 68064
220V / 3 / 60 / 40 Amps / 7.5 Hp
Spindle Bore 2-1/2”, Speeds 1600 Rpm, 4 Way Tool post
Taper Attachment, Steady, Coolant, Splash Guards
4 Way Feeds & Rapids
STANKO 1M63 27.5” X 60” ENGINE LATHE
Model 1M63H-1.5, Serial 16167
220/380V / 3 / 60 / 20 Hp
Spindle Bore 3-1/2”, Speeds 1250 Rpm, 4 Way Tool post
Coolant, 4 Jaw Chuck, 6 Way Feeds & Rapids
WEIPERT 26” X 80” ENGINE LATHE
Model W500E, Serial 18445
460V / 3 / 60 / 15 Hp
Spindle Bore 3-1/4”, Speeds 1120 Rpm, Coolant
40 Pos. Drop In Tool post W/ Holders, 4 Jaw Chuck
2 Axis Newall DRO, Taper Attachment
HARDINGE PRECISION LATHE
Model HLV-B, Serial 270-3
440V / 3 / 60 / 1 Hp
3000rpm, NEW Lead Screw, Threading, Coolant
HARDINGE SUPER PRECISION LATHE
Model DSM 5R, Serial DV-59-18327
460V / 3 / 60 / 1.5 Hp
4000 Rpm, Air Chuck
CAMTROL Mod. 62, Ser. 1284240262C
SOUTHBEND 10” X 24” ENGINE LATHE
Cat. No. CLC 8187A, Serial 16089RKX16
230/460V / 3 / 60 / 1Hp
Taper Attachment, Threading Dial, 4’ Bed Length, Tool Post
SCHAERER 26.5” X 62” HD ENGINE LATHE
MODEL UD630, SERIAL 16632
220/380v / 3 / 60 / 20 Hp
Spindle Bore 3-1/4”, Speeds 1400 Rpm, Coolant
16” Diam. 3 Jaw Chuck, Drop In Tool post & Holders
BARCORP 26” / 36” X 120” GAP BED ENGINE LATHE
MODEL EE-630-01, SERIAL 1091226
220 / 440v / 3 / 60 / 15 Hp
Spindle Bore 3-1/2”, Speeds 1400 Rpm
24” Diam. 4 Jaw Chuck, Drop In Tool post, Threading
Taper Turning Attachment, Camlock Spindle Nose
ENTERPRISE 13” X 40” GAP BED ENGINE LATHE
Model 1330, Serial E2-341
115/230/460v / 3 / 60 / 3 Hp
Spindle Bore 1.625”, Speeds 1600 Rpm, 4 Way Tool post, 9” Diam. 3 Jaw Chuck, Threading Dial, 2 Axis Feeds, Chip Tray, Coolant Tank, Steady Rest, Handles
MONARCH 18.5” X 55” ENGINE LATHE
MODEL 16CY, SERIAL 29458
Spindle Bore 1.56”, Speeds 550 Rpm
Threading, 2 Axis Feeds, 4 Way Tool post
Tailstock, Chip Pan, Flame Hardened Bed
In Good Running Condition
MILLING MACHINES
EX-CELL-O UNIVERSAL MILL
Model IR-3-22 Univ, Serial 6450
230V / 3 / 10 / 15 Amps
Table 10” X 42.5”, Geared Power Feed Box
Vertical / Horizontal Milling Head, ISO #40
Spindle 2000 Rpm
2-METALIK VERTICAL TURRET MILL
(1-New) Model F23, Serial 49
220V / 3 / 60 / 2.5 Hp
Table 9” X 47.5”, ISO #40
Spindle 2000 Rpm, Newall DRO
-Lot Tooling for Metalik Mill
2-KONDIA VERTICAL TURRET MILLS
Model FV-1, Serial AA-247 & AA-248
575V / 3 / 60 / 4.3 Amps / 3 Hp
Table 12” X 48”, Accurite Dro, Lube
4000 Rpm, R-8 Spindle
EX-CELL-O VERTICAL TURRET MILL
Model 602, Serial 6020542
575V / 3 / 60 / 2.5 Hp
Table 9” X 36”, Mitutoyo Dro, Lube
3800 Rpm, R-8 Spindle
BRIDGEPORT VERTICAL TURRET MILLS
Model Series I, Serial 2J 114443
220/440V / 3 / 60 / 2 Hp
Table 9” X 36”, Lube
4200 Rpm, R-8 Spindle
TOP WELL VERTICAL TURRET MILL
Model 3VK, Serial 824383
575V / 3 / 60 / 3 Hp
Table 10” X 50”, Accurite Dro, Lube
4200 RPM, R-8 Spindle
SIRCO HEAVY DUTY TURRET MILL
Model G-01, Serial 01576311
575V / 3 / 60 / 3 Hp
Table 12” X 43.5”, Mitutoyo Dro
Geared Table Feed, 2760 Rpm, ISO #40 Spindle
AJAX UNIVERSAL MILL W/ DOUBLE SWIVEL VERTICAL HEAD
MODEL 6B, SERIAL 14467
220/440V / 3 / 60 / 7.5 Hp
Spindle ISO #40, Speeds 1400 Rpm, Handle
Table 55” X 11”, 3 Axis Feeds & Rapids, Coolant
Double Swivel Vert. Head, Horz. & Vert. Draw Bars Horz. Arbor Support
ELLIOTT UNIVERSAL MILL W/ SWIVEL VERTICAL HEAD
MODEL 313, SERIES 70, SERIAL TBA
Spindle ISO #50, Speeds 2000 Rpm, Coolant
Table 64” X 14”, 3 Axis Feeds & Rapids, Swivel Table, Swivel Vertical Head, Horz. & Vert. Draw Bars, Pendant Control, Over Arm
TAR UNIVERSAL MILL W/ DBL SWIVEL VERTICAL HEAD
MODEL 2A, SERIAL 0432
220/440v / 3 / 60 / 7.5 Hp
Spindle Iso #40, Speeds 1350 Rpm
Table 60” X 14”, 3 Axis Feeds & Rapids
Hd Double Swivel Vert. Head, Horz. Arbor Support
Coolant, Handle, Over Arm
WMW HECKERT VERTICAL SWIVEL HEAD MILL
MODEL FSS 400/E, SERIAL 324294/34
380v / 3 / 60 / 20 Hp
Spindle Iso #50 W/ Power Draw Bar, Speeds 1400 Rpm Table 63” X 16”, Manual Quill Feed, 3 Axis Feeds & Rapids Swivel Vert. Head, Auto Lube System, Work Light, Coolant
TOS VERTICAL SWIVEL HEAD MILL
MODEL FA5V, SERIAL 36674
220/380v / 3 / 60 / 21 Hp
Spindle Iso #50, Speeds 1400 Rpm, Manual Quill Feed Table 79” X 17”, 3 Axis Feeds, Central Lube Pump Swivel Vert. Head, Coolant
KEARNEY & TRECKER UNIVERSAL MILL
MODEL CE, SERIAL 3CE 3135
220/440V / 3 / 60 / 9.5 Hp
Spindle ISO #50, Speeds 1300 Rpm
Table 67” X 15”, 3 Axis Feeds & Rapids
Swivel Table, 2 Horz. Arbor Supports
Swivel Vert. Head, Coolant
TOS HORZ. MILL W/ DOUBLE SWIVEL VERT. HEAD MODEL 3A, SERIAL 57227
220/440v / 3 / 60 / 10 Hp
Spindle Iso #40, Speeds 1400 Rpm
Table 63” X 14”, 3 Axis Feeds, Coolant, Work Light
Double Swivel Vert. Head W/ Swing Bracket
KEARNEY & TRECKER ROTARY HEAD MILL
MODEL 2D, SERIAL 5874010
220/440V / 3 / 60 / 3 Hp Spindle Motor
Speeds 4000 Rpm, Table 36” X 16”, Power Quill Feed Built In Rotary Head for Facing & Boring, Work Light Geared Feed Box w/ Motor Power Take Off Coolant, 9 KVA 440V to 208V Transformer Excellent Condition from US Govt. Storage
HERCULES HORIZONTAL MILL W/ VERTICAL SWIVEL HEAD
MODEL 3P, SERIAL 2972
220/440v / 3 / 60 / 10 Hp
Spindle ISO #50, Speeds 1500 Rpm
Table 63” X 12”, 3 Axis Feeds & Rapids
Coolant, Horz. Arbor Support & Over Arm
SAJO UNIVERSAL TOOLROOM MILL
Model UF-52, Serial 671524
208V / 3 / 60 / 3.5 Hp
Spindle ISO #40, Speeds 1800 Rpm
Table 41.5” X 9.5”, Table Swivel
3 Axis Feeds, Horizontal Arbor Support
Coolant, Imperial Feeds & Graduations
Excellent Shape & Condition
AUTOMATIC PRODUCTION MILL
Model No. 1224, Serial 82-1004-10
440v / 3 / 60 / 12.5 Amps / 5 Hp
Spindle Iso #40, Speeds 3000 Rpm, Vertical Head Adjustment
Table 48” X 12”, Table Feeds 1 To 40 Ipm, Change Gears,
Automatic Quill Retraction, Horz. Arbor Support
DECKEL PANTOGRAPH (COPY) MILL
MODEL KF-12, SERIAL 3200-1244
220/440v / 3 / 60 / 2.5 Hp
Spindle W/ Colet Holder, Speeds 10,000 Rpm
Fully Adjustable Work Piece and Copy Tables
Smooth Hand Operation, Coolant
FORGES DE GILLY HORIZONTAL BORING MILL
Model HBM 4”, Serial 150 538 10632
220/440v / 3 / 60 / 10 Hp
Spindle Diam. 4”, Spindle Mt #6, Speeds 975 Rpm
Faceplate 30” Diam., Faceplate Speeds 160 Rpm
Table 51” X 44”, Built In Rotary Table
C/W Tailstock W/ Arbor Support, Handle,
Multiple Tools and Holders
2-MILLING TAILSTOCK, 12” CENTER HEIGHT
GRINDERS
MAJESTIC INTERNAL GRINDER
Serial 8607
220/440V / 3 / 60
6” Dia. 4 Jaw Chuck, Table Travel 13”
Spindle Cross Travel 8”, Coolant
Splash Guards, Work Light
EX-CELL-O CENTER LAP GRINDER
Model No. 74A, Serial 74201
Capacity 10” Dia. X 42” Centers
Wheel Dresser
HAMMOND CARBIDE TOOL GRINDER
Model CBW-6, Serial 2047
460V / 3 / 60 / 1 Hp
Double Sided Work Station, Coolant System
KIKINDA PRECISION MANUAL SURFACE GRINDER
Model BO5, Serial 114
440V / 3 / 60 / year 1999
Manual Magnetic Chuck 6” X 18”, Excellent Condition
REID MANUAL SURFACE GRINDER
Model 18H, Serial 14035
220/440V / 3 / 60
Electric Power Chuck W/ Frequency Control
BROWN & SHARPE MANUAL SURFACE GRINDER
Model 618 Micro Master, Serial 523-6180-298
220V / 3 / 60
Manual Magnetic Chuck 6” X 18”, Micro Feed Cross & Vertical Axis
CHURCHILL 10” X 34” CYLINDRICAL GRINDER
MODEL BW, SERIAL 10629 (34945)
550v / 3 / 60 / 10 Hp
Wheel 24” X 2” X 12”, New Stone, Swivel Table
Coolant System & Tank, $5,000 In Recent Service In Very Good Condition
1-FACE PLATE 42” DIAMETER
BLANCHARD 18” ROTARY SURFACE GRINDER
MODEL NO.11, SERIAL 452
600v / 3 / 60 / 1.5 Hp
18” Diam. Electric Magnetic Chuck
Rapid Head Up & Down, Coolant
Load Meter, Splash Guards
MATTISON AUTOMATIC HYDRAULIC SURFACE GRINDER
SERIAL 13640
550v / 3 / 60 / 15 Hp
Wheel 20” X 2” X 12”, Wheel Dresser
Electric Magnetic Chuck 36” X 12”
Incremental Head & Cross Feed, Table Speed Control Coolant System & Tank
BRYANT 16” X 20” HYDRAULIC INTERNAL GRINDER
Model No. 1116, Serial R10633
220v / 3 / 60 / 5 Hp
Max Work Piece Swing 16”, Wheel Slide Traverse 20”
Grinding Stroke 9”, 45 Degree Swivel Work Head
Table Movement 10” Fwd & Rev, Wheel Dresser
BROWN & SHARPE 6” X 18” HYDRAULIC CYLINDRICAL GRINDER
MODEL NO.10, SERIAL 11W (1097)
220v / 3 / 60 / 22 Amps / 7.5 Hp
Standard Wheel 26” X 3” X 12”, Speeds 1050
Head Stock Speeds 97 / 154 / 240 / 383 Rpm
Incremental Head Feed, Power Head Feed,
Plunge & Traverse Cross Feed, Table Speed Adjustment, Tested In House
ELLIOTT AUTOMATIC SURFACE GRINDER
MODEL 8-20,
SERIAL BEC 109 596 848220/440v / 3 / 60 / 1.5 Hp
Magnetic Chuck 20” X 8”, Coolant 1 Hp Pump
Hydraulics 1 Hp Pump, Adjustable Cross Feed
Intermittent or Continues Cross Feed, Table Speed Control Power Head Up And Down
-Lot Foundry tooling
NORTON 10” X 32” HYDRAULIC CYLINDRICAL GRINDER
MODEL LCTU, SERIAL 26179
220/440v / 3 / 60 / 7.5 Hp
Actual Swing 11”, Wheel 24” X 1-1/2” X 12”
Auto Head Feed, Table Feed Controls, Steady Rest
Swivel Table, Coolant System & Tank, Work Light
SUNNY HYDRAULIC SURFACE GRINDER
MODEL SGS-816H, SERIAL 89321
230v / 3/ /60 / 3 Hp
Wheel 8” X 3/4” X 2”, Wheel Dresser
Electric Magnetic Chuck 18” X 6.5”
Auto Lubrication System, Micro Head Feed
Hydraulic Table W/ Speed Adjustment
Coolant, Work Light
CINCINNATI 4” X 30” HYDRAULIC CYLINDRICAL GRINDER
MODEL 4 X 18, SERIAL 2P0A5E-2
220/440v / 3 / 60
Wheel 14” X 1” X 5”, Auto Headstock, Wheel Retraction, Coolant, Hydraulics Rebuilt In 1987; Never Used Since Rebuild, In Excellent Condition
FORD SMITH HD DOUBLE WHEEL PEDESTAL GRINDER
Model 41-P, Serial I011-1
208/220/440V / 3 / 60 / 2 Hp
Wheels 12” X 2” X 3” Both Sides
Main Power On / Off Buttons
Vented For Dust & Particle Removal
NIPPEI NO. 2 CENTERLESS GRINDER
Model CLG-2BII, Serial 15757
3.5625” Diam. Work Capacity
8” Wide Wheels, Wheel Dressers
17 To 128 Rpm Regulating Wheel
Thru Feed Work Rest, Hydraulic Profile
DUMORE TOOL POST GRINDER
Model 8584-210, Cat No. 57-031
120V / 1 / 60 / 8.2 Amps / 0.75 Hp
No Load Rpm 16,000, Wheel Dia. 0.50” To 6.00”
Lot of Tooling for Dumore Tool Post Grinder
CHURCHHILL 10” X 24” HYDRAULIC CYLINDRICAL GRINDER W/ SWIVEL VERTICAL HEAD
Model CW, Serial 22633
550v / 3 / 60 / 5 Hp
Wheel 12” X 1” X 4”, Power Traverse
Coarse & Fine Hand Feeds, Work Head & Table Speed
Adjustment, Head Swivel 90 Degrees L & R, Guards
Coolant, Tank, Work Light
HONES
SUNNEN PRECISION HORIZONTAL HONE
Model LBB-1699K, Serial 12435
115/230V / 1 / 60 / 0.50 Hp
Spindle Collar 1-3/4” ID
-Lot Hone Tooling for above
NAGEL PRECISION HORIZONTAL HONE
Model HHM- 90, Serial 282427
440V / 3 / 60
Capacity 6-90mm / 0.236” – 3.543”
Oil Tank & Pump
RADIAL ARM DRILLS
WALKER TURNER RADIAL ARM DRILL PRESS
on Heavy Duty Steel Table
Serial 16 0052
220/440V / 3 / 60 / 0.5 Hp
Spindle MT #3, Speeds 8300 Rpm
Quill Travel 5.5”, Ram Travel 15”, Swivel Head
Steel Table 36” X 36” X 30” H
IKEDA RADIAL ARM DRILL PRESS
Model RM-1375, Serial 81288
220/440V / 3 / 60 / 7.5 Hp
Spindle MT 5, Speeds 1500 Rpm, Quill Travel 14”
Drill Cap. 2-3/4”, Tap Cap 2-3/8, Auto Feed
Work Light, Electric Clamping, Fwd / Rev Switch, Coolant
CARLTON RADIAL ARM DRILL PRESS
220/440V / 3 / 60 / 5 Hp
Model 4’arm – 9” Col., Serial 9a8-51-652-804-607
Spindle Mt 4, Speeds 1500 Rpm, Quill Travel 12”
Drill Cap. 2-1/2”, Tap Cap. 2-1/8”, Auto Feed
STANKO RADIAL ARM DRILL PRESS
Model 2M55, Serial 13151
200V / 3 / 60 / 10 Hp Spindle MT 5, Speeds 2000 Rpm, Quill Travel 16” Drill Cap. 2-3/4, Tap Cap. 2-3/8”, Auto Feed Elect. Clamping, Fwd/Rev Switch, Horz. Travel 49”
ASQUITH RADIAL ARM DRILL PRESS
Model OD3 – 162, Serial 24140
400/440v / 3 / 60 / 10 Hp
Spindle Mt #5, Speeds 850 Rpm, 3-1/4” Drilling Cap.
Column Diam. 24”, Arm Length 96”
Vertical Arm Travel 72”, Base 147” X 48”
C/W Cast Iron Table 60” X 36” X 23”,
Approx. Total Weight 19,000 Lbs
Note: Requires Minor Electrical Attention
DRILL PRESSES
(NEW) METALIK COLUMN DRILL PRESS
Model PK 050A, Serial 243
220V / 3 / 60 / 20 Amps / 6.5 Hp
Spindle MT 5, Speeds 1032 Rpm, Quill Travel 9”
Auto Feed, Tapping Cam Cycle, Work Light
Adjustable Table 24.5” X 21.5”, Coolant
KOLB HD VERTICAL BOX COLUMN DRILL PRESS
Model Hermann Kolb, Serial 723
440V / 3 / 60 / 10 Hp
Spindle MT 5, Speeds 1700 Rpm, Quill Travel 12” In Dove Tail Gear Box Vert. Travel 26”, Drill Cap. 3-1/2”, Tap Cap. 3”Auto Feed Cycle, Coolant, Rigid & Precise Drilling
BUFFALO TWIN SPINDLE DRILL PRESS
MODEL NO. 16, SERIAL 50 9862
208/220/440v /3 / 60 / 1 Hp
Spindle Mt 3, Speeds 3000 Rpm, Spindle Stroke 6”
Table 30” X 14” Height Adjustable
HYDRAULIC PRESSES
KEARNEY & TRECKER SIMPLEX SAVAGE 42 TON - 4 POST HYDRAULIC PRESS
Model No. 42, Serial 1416
230/460v / 3 / 60 / 7.5 Hp
Cylinder Diam. 4”, Stroke 11”
15” X 26” Between Posts, 13” Daylight
NEW 20 TON SHOP PRESS Model 20 Ton H Frame, Serial CHIM 02682 (FULLY ASSEMBLED)
K.B.WILSON 18 TON DIE PRESS
Model 37CT18, Serial 1046002
230/460V / 3 / 60 / 7.5 Hp
12” Vertical Stoke, 18 Ton Non Guided Ram
From US Gov’t Storage “Like NEW”
DENISON 3 TON HYDRAULIC MULTIPRESS
Model S035LA72 Special, Serial 19062
440v / 3 / 60 / 5 Hp
Cylinder Bore 2.25”, Stroke 12”, Daylight 24”,
Throat 7”, Ram Diam. 1.625”, Tank 20 Gallon,
Pump 9 GPM, Palm Buttons
Hydraulic Tank & Motor, Palm Buttons
Piece Counter, Ready to Use
METAL CUTTING BANDSAWS
DELTA 9” VERTICAL BANDSAW “LIKE NEW”
Model 28-150, Serial J9926
120V / 1 / 60 / 0.33 Hp
Tilt Table Up To 45 Degrees, Blade Width 0.125” To 0.375”
Blade Thickness 0.014” X 59.5” Long, Work Light
(2) AUTOMATIC 10” HORIZONTAL BANDSAWS
Model OL-261 M, Serial 106 & 110
220/440v / 3 / 60 / 2.5 Hp
Blade 144” X 1” X .035”, Speeds Variable 370 Fpm
Cutting Cap. 10” Round, Auto Feed, Auto Blade Breakage
Auto Shut Off, Power Head Up & Down, Coolant
Power in Feed Friction Roller, Manual
W.F. WELLS AUTOMATIC DOUBLE COLUMN HORIZONTAL BANDSAW
MODEL F15, SERIAL A1410 801600
220/440v / 3 / 60
Automatic Bar Feed, Hydraulic Shuttle Vise, Hydraulic Clamping Preset Counter, Vise Force, Blade Tension, Cutting Force Controls
Blade Dimensions 14’5” X 1-1/4” X 042”, Cutting Cap. 16” X 18” High
Hydraulics Disconnected For Transport & Loading
DOALL HYDRAULIC VERTICAL TILT BANDSAW
Model U-1421, Serial 375-80195
550v / 3 / 60 / Drive 2 Hp
Blade 172” X 1-1/4” X .042”, Speeds 105 To 275 Fpm
Cutting Capacity 14” Deep X 21” High
Head Tilt 45 Degrees Left & Right, Table Vise
Power Head Forward & Reverse, Work Light, Coolant, Chip Trays
OTHER SHOP EQUIPMENT
BURR KING WHEEL POLISHER
Model 600, Serial H3541
220/440V / 3 / 60 / 0.75 Hp
Max 7” Wheel Diameter
PERFECTO 12” POWER STOCK STRAIGHTENER
Model 17-12-6, Serial 52-89018
460V / 3/ 60, 1.7” Dia. Rolls
Max Thickness 0.020” To 0.080”, Max Width 12”
Speeds 300 To 900 Rpm
NEWCOR PNEUMATIC SPIKE WELDER
Model No.2 Spike Welder, Serial X8204
110v / 60, Air Pressure 50 To 400
Squeeze, Weld, Hold, Repeat Settings
MOTCH AND MERRYWEATHER AUTOMATIC SAW BLADE SHARPENER
Model No. 1, Serial 13865
Capacity 12” To 42” Dia., Auto Index
SPEEDY MELT METAL FOUNDRY W/ GAS MANIFOLD
Model B-16, Serial 2460
115V / 1 / 60 / 4.2 Amp / BTU 475M
BROWN & BOGGS PNEUMATIC SHEAR
Model No. 169, Serial 83265
Max width 36”, capacity mild steel 0.1875”
Complete rebuild, sharpened blade
LEPEL HIGH FREQUENCY POWER GENERATOR
Model T-50-3-KC-TL42, Serial 7505-T
Type DWG T-5001-103
460V / 3 / 60 / 150 Amps / 120 KVA
Requires New Coil
FORD SMITH VERTICAL SLOTTER / SHAPER
Model 4, Serial 1238
550V / 3 / 60 / 3 Hp
Vertical Stroke 4”, Table 11” X 13”
Table Travels Xyz 10” / 10” / 12”
PRATT & WHITNEY 12” VERTICAL SHAPER
MODEL B M-1251, SERIAL 198
220/440v / 3 / 60
24” Rotary Table, 2 Axis Feeds, Clapper Box
Incremental Table Indexing, Head Angle Adjustment, 19 / 31 / 48 / 76 Strokes Per Min
JA SWIVEL BOX TABLE
Serial 8070008
Table 27.5” X 24”, Swivel 90 Degrees L & R
Heavy Duty Construction
1-24” x 8’ Magnetic Chuck W/ Clamps
CNC HORIZONTAL ROTARY TABLE
Model 7400 – 0227, Serial 2917
360 Degrees Rotation, Infinite Programmable
25” Diam. Table W/ 8 “T” Slots
CAST IRON BOX TABLE
Large Capacity “T” Slots on Two Sides
Size 48” X 30” X 30” High
1-1/4” X 2” “T” Slots
COLLINS MICRO FLAT GRANITE SURFACE TABLE SERIAL 67894
Size 144” X 72” X 12” Thick
Comes W/ Custom Steel Stand With Leveling Screws Last Calibrated By Exton Granite Calibrations, Accredited Certificate # 1905.01, Iso # 17025,Temp 78 Degrees, Humidity 70% Grade ‘B’, Size 144” X 72”, S/N C67894-Kba
Repeatability 0.000280”, Flatness 0.00440”
BROWN & SHARPE ULTRAMATIC R/S SCREW CUTTING MACHINE
Model No. 3, Serial 542-3-421
208V / 3 / 60 / 30 Amp Full Load
Capacity 2”, Max Stock Feed 4”
6 Station Turret, Single Spindle, 4 Slides
Barfeed Tube and Stock Supports
Multiple Collets, Tooling & Accessories
DEVILBISS LAYDOWN COMPRESSOR
Model 445, Serial L-91-1
230/460V / 3 / 60 / 15 Hp
900 max rpm @ 175 PSI, 600 max rpm @ 300 PSI
Tank max 200 PSI , tank capacity 121 gallons,
c/w tank shut off ball valve
FOR SALE BY PRIVATE TREATY
NEW RYAZAN 47” X 120” HD ENGINE LATHE MODEL RT117-3, SERIAL 238
440v / 3 / 60 / 30 Hp, 47.24” / 35.43” Swing Over Bed / Cross Slide, 120” Cc, 40” Diam. 4 Jaw Independent Chuck, Spindle Bore 5.5”, Speeds 500 Rpm, 2 Speed Tailstock, 6 Way Feeds & Rapids, Taper Turning Attachment, 20” Steady Rest, Follower Rest, Coolant, Work Light, Threading, 1 Year Warranty
2004 RYAZAN (STANKO) 27.5” X 120” HD ENGINE LATHE MODEL 1M63H-3, SERIAL 3969,
220/380v / 3 / 60 / 20 Hp, 27.5” / 13.78” Swing Over Bed / Cross Slide, 120” Cc, 220” Diam. 4 Jaw Independent Chuck, Spindle Bore 4.125”, Speeds 1250 Rpm, 6 Way Feeds & Rapids, Taper Turning Attachment, 13.75” Steady Rest, Follower Rest, Coolant, Work Light, In Excellent Condition
SMALL TOOLING AND ACCESSORIES
2 -Arc Welders, Welding Cart & Gages, Quantity 3 Exhaust Hood Fans, (Suitable For Welding, Smoke, Dust, Particle Removal), Quantity Faceplates In Various Sizes And Spindle Mounts, Quantity NEW & Used 3 And 4 Jaw Chucks In 4”/6”/8”/10”12”/16”/20” Diameters, Quantity Automatic Power Transformers In Various KVA Sizes And Voltages, Quantity NEW & Used ISO #40 & #50 Milling Holders, Quantity Horizontal Milling Arbors, Quantity Grinding Attachments, Quantity NEW & Used 40 Position Drop In Tool posts In ‘B’ / ‘C’ / ‘D’ Sizes, Quantity NEW & Used 40 Position Tool holders And Inch Boring Bar Holders, Quantity NEW & Used Dead Centers In MT #2 /#3 /#4 / #5 / #6, Quantity NEW Indexing Horizontal & Vertical Rotary Tables In 6”/ 8”/ 10” Diameters, Quantity NEW Precision & Angle Lock Style Milling Vises In 4”/ 6”/ 8” Jaw Widths, Quantity NEW Digital Vernier Calipers In 6”/ 8”/ 12” Lengths, Quantity NEW Dial Indicators, 6 Jewel, 0 – 1” Travel, Quantity NEW Standard Magnetic Base, Quantity NEW Single Knob Cable Magnetic Base, Quantity NEW Ball Bearing Drill Chucks From 1/2” To 1” Capacity, Quantity NEW Drill Chuck Arbors In Various Sizes, Quantity NEW Morse Taper Drill Sleeves, Quantity NEW Turning Inserts, Major Brands In Various Sizes, -Quantity NEW Milling Inserts, Major Brands In Various Sizes, Quantity NEW Laydown Style Threading Inserts, Major Brands In Various Sizes, Quantity NEW Grooving Inserts, Major Brands In Various Sizes, Quantity NEW “Top Notch Style” Threading & Grooving Inserts, Major Brands In Various Sizes, Quantity NEW Brazed Tools In Various Styles And Sizes, Quantity NEW End Mills In Cobalt, Carbide, 2 Flute & 4 Flute Center Cutting, Quantity NEW Precision And Standard Live Centers In MT #2/ #3/ #4/ #5/ #6, Quantity NEW & Used Morse Taper Shank Drills, Quantity NEW Morse Brands Spiral & Straight Flute Taps, 2 And 4 Flute End Mills, Quantity NEW Valenite Brand Tooling & Inserts, Quantity NEW Standard Turning & Milling Indexable Holders W/ Common Hardware, Quantity NEW Standard Threading & Boring Bars W/ Common Hardware, Quantity NEW Parting Blades, Inserts And Holders In Various Sizes, Quantity NEW Grinding Discs, Flap Wheels, Abrasive Pads, Quantity NEW Grinding Wheels In Various Sizes, Quantity NEW Bimetal Bandsaw Blades In Various Sizes, Quantity NEW & Used Inch / Metric Dumont Brand Broaches, Shims, Collars In Various Sizes, Quantity Lathe Coolant & Chip Guards, Quantity NEW Magna Reciprocating Blades, Extra Length Drill Bits, Concrete Drill Bits (Straight Shank And SDS Plus), NEW BOSCH Concrete Variable Speed Hammer Drill W/ Dust Control Vacuum & Bag, Model 11221 DVS, Serial 56900101 115V / 60Hz / 6.9 Amp / 0 To 1040 RPM, Quantity NEW BOSCH Concrete Hammer Drills, NEW 14” Diameter Welding Spinner, 360 Degree Rotation W/ 6” Diam. 3 Jaw Chuck W/ 2PC Jaws, NEW 14” Diameter Welding Spinner, 360 Degree Rotation W/ 8” Diam. 3 Jaw Chuck W/ 2PC Jaws, NEW 6” – 12” Outside Micrometer Set, NEW Carbide Burrs In Various Styles, NEW Drop In Tool post Set W/ Tool holders For Lathes 13” – 18” Swing, & More
AUCTIONEERS NOTE: This is an unreserved liquidation of quality surplus stock. All Equipment is in Working Condition. Major Equipment will be Sold Live On-Line via BidSpotter.com @ 12 NOON. Please Pre-register with
BidSpotter.com to Bid On-Line or Make Arrangements to Attend the Auction in Person. 15% INTERNET FEE/BUYERS FEE ON ANY PURCHASES MADE VIA www.BidSpotter.com
PAYMENT MUST BE MADE WITH IN 24 HRS BY BANK WIRE TRANSFER
For More Information and Pictures of Equipment See www.montgomeryauctions.com
10% BUYERS FEE SUBJECT TO ADDITIONS & DELETIONS
LUNCH AVAILABLE
CASH/CERTIFIED CHEQUE/ BANK DRAFT /DIRECT BANK WIRE /CREDIT CARD
VIEIWING : MONDAY MARCH 21 @ 9AM-5PM
REMOVAL : TO BE COMPLETED BY MARCH 29 @3PM
THERE WILL BE A SMALL LOADING FEE PER MACHINE
MONTGOMERY AUCTION SERVICES LTD.
1-800-371-6963 BLACKFALDS, ALBERTA 403-885-5149
Downloads
- 20110317120857.pdf
Sale catalogue